Cisco WAP361 Wireless-AC/N Dual Radio Wall Plate Access Point with PoE
High-Performance, Easy-to-Deploy, and Highly Secure Business-Class Wireless-AC Connectivity

Cisco WAP361 Wireless-AC/N Dual Radio Wall Plate Access Point with PoE Product Image

Cisco Products

Cisco Small Business 300 Series

Cisco WAP361 IEEE 802.11ac 1.20 Gbit/s Wireless Access Point
5 GHz

#WAP361-A-K9-NA
המחיר שלנו: הצעת מחיר

מחירים נוספים מופיעים למטה, או לחצו כאן!

שימו לב: כל המחירים באתר כוללים מע"מ. החיוב יבוצע על פי שער "העברות והמחאות מכירה" של המטבע (דולר אמריקאי) ביום אישור ההזמנה.

Overview:

Highlights

Provides cost-effective 802.11ac connectivity with speed up to 1.2 Gbps
Supports 2x2 multiple-input multiple-output (MIMO) technology with two spatial streams for maximum performance on both 2.4- and 5.0-GHz radios
5 Gigabit Ethernet LAN with Energy Efficient Ethernet
Mounts directly to an electrical or data junction box
A captive portal helps enable highly secure guest access with customized roles and rights
Single Point Setup requires no controller for easy, cost-effective deployment of multiple access points
Works right out of the box with easy installation and a simple web-based configuration and wizard

Product Overview

In today's dynamic business environment, employees are becoming more mobile and collaborative than ever. To stay productive, they need dependable, business-class access to network applications throughout the office. The Cisco® WAP361 Wireless-AC/N Dual Radio Wall Plate Access Points with Power over Ethernet (PoE) provide a simple, cost-effective way to extend highly secure, high-performance mobile networking to your employees and guests, so they can stay connected anywhere in the office regrdless of what mobile devices they use. This flexible solution lets you connect dozens of employees, and can scale to accommodate additional users and changing business needs.

The WAP361 access point uses a concurrent dual-band radio for improved coverage and user capacity. The 2x2 multiple-input multiple-output (MIMO) technology with two spatial streams allows the access point to run at maximum performance in both 5.0-GHz and 2.4-GHz frequencies. Gigabit Ethernet LAN interfaces with PoE facilitates flexible installation and can reduce cabling and wiring costs. Intelligent quality-of-service (QoS) features let you prioritize bandwidth-sensitive traffic for voice over IP (VoIP) and video applications.

To provide highly secure guest access to visitors and other users, the WAP361 Wireless-AC/N access point supports a captive portal with multiple authentication options and the ability to configure rights, roles, and bandwidth. A customized guest login page lets you present a welcome message and access details, and reinforces your brand with company logos.

WAP361 access points are easy to set up and use, with an intuitive wizard-based configuration to get you up and running in minutes. An attractive design with flexible mounting options allows the access points to blend well into any small-business environment.

To enhance reliability and safeguard sensitive business information, WAP361 access points support both Wi-Fi Protected Access (WPA) Personal and Enterprise, encoding all your wireless transmissions with powerful encryption. In addition, 802.1X RADIUS authentication helps keep unauthorised users out.

Designed to scale smoothly as your organization grows, the access points feature controller-less Single Point Setup, which simplifies the deployment of multiple access points without additional hardware. With a WAP361 access point, you can extend business-class wireless networking to employees and guests anywhere in the office, with the flexibility to meet new business needs for years to come.

Figure 1 shows a typical wireless access point configuration. Figures 2, 3, and 4 show the product's front, back, and side panels, respectively.

Figure 1. Typical Configuration

Figure 2. Front Panel

C78-736451-00_figure02

Figure 3. Back Panel

Figure 4. Side Panel

Features and Benefits:

Concurrent dual-band radio support up to 867 Mbps on a 5.0-Ghz radio and 300 Mbps on a 2.4-Ghz radio to increase capacity and coverage
2x2 MIMO with two spatial streams on both 5.0 GHz and 2.4 GHz allows for maximum performance
Single Point Setup, a controller-less technology, simplifies the deployment and management of multiple access points, without requiring additional hardware
A 5-port Gigabit Ethernet LAN switch supports both PoE powered device (PD) and powered sourcing equipment (PSE) so that IP devices can be powered and the access point can be powered by the backbone switch
Robust security, including WPA2, 802.1X with RADIUS secure authentication, and rogue access point detection, help protect sensitive business information
Captive portal support facilitates highly secure, customized guest access with multiple rights and roles
Simple installation and an intuitive web-based configuration and wizard facilitate fast, simple deployment and setup in minutes
Support for PoE allows for easy installation without expensive additional wiring
A sleek design with multiple internal antennas and a versatile mounting kit allows for mounts directly to an electrical or data junction box
Intelligent quality of service (QoS) prioritizes network traffic to help keep critical network applications running at top performance
Power-saving sleep mode and port control features help to increase energy efficiency
Workgroup Bridge mode lets you expand your network by wirelessly connecting to a second Ethernet network
Support for IPv6 lets you deploy future networking applications and operating systems without costly upgrades
A limited lifetime hardware warranty provides peace of mind

Technical Specifications:

Specifications	Description
Standards	IEEE 802.11ac, 802.11n, 802.11g, 802.11b, 802.3af/at, 802.3u, 802.1X (security authentication), 802.1Q (VLAN), 802.1D (Spanning Tree), 802.11i (WPA2 security), 802.11e (wireless QoS), IPv4 (RFC 791), IPv6 (RFC 2460)
Cabling type	Category 5e or better
Antennas	Internal antennas optimized for installation on a wall or ceiling
Operating system	Linux
Physical Interfaces
Ports	5 - 10/100/1000 Ethernet, with support for 802.3af/at PoE, power port for AC adapter (not included)
Power supply	802.3af/at PoE and external 48V/1.25A DC power adapter (not included)
Buttons	Reset button
Lock slot	Slot for Kensington lock
LEDs	One multi-function LED
Physical Specifications
Physical dimensions (W x D x H)	6.5 x 4.33 x 1.8 in. (165 x 110 x 45.75 mm)
Weight	1.06 lbs or 480 g
Network Capabilities
VLAN support	Yes
Number of VLANs	1 management VLAN plus 16 VLANs for SSIDs
802.1X supplicant	Yes
SSID-to-VLAN mapping	Yes
Auto-channel selection	Yes
Spanning Tree	Yes
Load balancing	Yes
IPv6	Yes ● IPv6 host support ● IPv6 RADIUS, syslog, Network Time Protocol (NTP)
Layer 2	802.1Q-based VLANS, 16 active VLANS plus 1 management VLAN
Security
WPA, WPA2	Yes, including Enterprise authentication
Access control	Yes, management access control list (ACL) plus MAC ACL
Secure management	HTTPS
SSID broadcast	Yes
Rogue access point detection	Yes
Mounting and Physical Security
Multiple mounting options	Mounting bracket included for easy mounting to junction box
Physical security lock	Kensington lock slot
Quality of Service
QoS	Wi-Fi Multimedia and Traffic Specification (WMM TSPEC), client QoS
Performance
Wireless throughput	Up to 1.2-Gbps data rate (real-world throughput will vary)
Recommended user support	Up to 128 connective users, 32 active users per radio
Multiple-Access Point Management
Single Point Setup	Yes
Number of access points per cluster	8
Active clients per cluster	240
Configuration
Web user interface	Built-in web user interface for easy, browser-based configuration (HTTP, HTTPS)
Management
Management protocols	Web browser, Simple Network Management Protocol (SNMP) v3, Bonjour
Remote management	Yes
Event logging	Local, remote syslog, email alerts
Network diagnostics	Logging and packet capture
Web firmware upgrade	Firmware upgradable through web browser, imported or exported configuration file
Dynamic Host Configuration Protocol (DHCP)	DHCP client
IPv6 host	Yes
HTTP redirect	Yes
Wireless
Frequency	Dual concurrent radios (2.4 and 5 GHz)
Radio and modulation type	Dual radio, orthogonal frequency division multiplexing (OFDM) IEEE 802.11a/n: OFDM (BPSK, QPSK, 16 QAM, 64 QAM) IEEE 802.11ac: OFDM (BPSK, QPSK, 16 QAM, 64 QAM, 256 QAM)
WLAN	802.11n/ac 2x2 MIMO with 2 spatial streams at 5 GHz 2x2 MIMO with 2 spatial streams at 2.4 GHz 20-, 40-, and 80-Mhz channels for 802.11ac 20- and 40-Mhz for 802.11n PHY data rate up to 1.2 Gbps 802.11 Dynamic Frequency Selection (DFS)
Data rates supported	802.11a/b/g: ● 54, 48, 36, 24, 18, 12, 9, 6, 11, 5.5, 2, and 1 Mbps 802.11n: 6.5 to 300 Mbps ● 20-MHz bandwidth: MCS 0-15 for supported data rates ● 40-MHz bandwidth: MCS 0-15 for supported data rates 802.11ac: 6.5 to 867 Mbps ● 20-MHz bandwidth: MCS 0-9 for supported data rates ● 40-MHz bandwidth: MCS 0-9 for supported data rates ● 80-MHz bandwidth: MCS 0-9 for supported data rates
Frequency band and operating channels	A Regulatory Domain: ● 2.412 to 2.462 GHz; 11 channels ● 5.180 to 5.240 GHz; 4 channels ● 5.260 to 5.320 GHz; 4 channels ● 5.500 to 5.700 GHz; 8 channels ● 5.745 to 5.825 GHz; 5 channels E Regulatory Domain: ● 2.412 to 2.472 GHz; 13 channels ● 5.180 to 5.240 GHz; 4 channels ● 5.260 to 5.320 GHz; 4 channels ● 5.500 to 5.700 GHz; 8 channels R Regulatory Domain: ● 2.412 to 2.472 GHz; 13 channels ● 5.180 to 5.240 GHz; 4 channels ● 5.260 to 5.320 GHz; 4 channels	C Regulatory Domain: ● 2.412 to 2.462 GHz; 11 channels ● 5.180 to 5.240 GHz; 4 channels ● 5.260 to 5.320 GHz; 4 channels ● 5.745 to 5.825 GHz; 5 channels K Regulatory Domain: ● 2.412 to 2.472 GHz; 13 channels ● 5.180 to 5.240 GHz; 4 channels ● 5.260 to 5.320 GHz; 4 channels ● 5.500 to 5.620 GHz; 7 channels ● 5.745 to 5.805 GHz; 4 channels J Regulatory Domain: ● 2.412 to 2.472 GHz; 13 channels ● 5.180 to 5.240 GHz; 4 channels ● 5.260 to 5.320 GHz; 4 channels ● 5.500 to 5.700 GHz; 11 channels
Non-overlapping channels	2.4 GHz ● 802.11b/g ◦ 20 MHz: 3 ● 802.11n ◦ 20 MHz: 3	5 GHz ● 802.11a ◦ 20 MHz: 21 ● 802.11n ◦ 20 MHz: 21 ◦ 40 MHz: 9 ● 802.11ac ◦ 20 MHz: 21 ◦ 40 MHz: 9 ◦ 80 MHz: 4
Wireless isolation	Wireless isolation between clients
External antennas	None
Internal antennas	Internal fixed PiFA antenna
Antenna gain in dBi	Maximum antenna gain of 4.35 dBi on 2.4 GHz Maximum antenna gain of 3.96 dBi on 5 GHz
Wireless distribution system (WDS)	Yes
Fast roaming	Yes
Multiple SSIDs	16
Wireless VLAN map	Yes
WLAN security	Yes
Wi-Fi Multimedia (WMM)	Yes, with unscheduled automatic power saving
Operating Modes
Access point	Access point mode, WDS Bridging, Workgroup Bridge mode
Environmental
Power options	IEEE 802.3af/at Ethernet switch Cisco power injector: SB-PWR-INJ2-xx Cisco AC Adapter - SB-PWR-48V-xx (not included) PoE peak power: 19.2 W (with PSE load)
Compliance	Safety: ● UL 60950-1 ● CAN/CSA-C22.2 No. 60950-1 ● IEC 60950-1 ● EN 60950-1 Radio approvals: ● FCC Part 15.247, 15.407 ● RSS-210 (Canada) ● EN 300.328, EN 301.893 (Europe) ● AS/NZS 4268.2003 (Australia and New Zealand) EMI and susceptibility (Class B): ● FCC Part 15.107 and 15.109 ● ICES-003 (Canada) ● EN 301.489-1 and -17 (Europe)
Operating temperature	0° to 40°C (32° to 104°F)
Storage temperature	-20° to 70°C (-4° to 158°F)
Operating humidity	10% to 85% noncondensing
Storage humidity	5% to 90% noncondensing
System memory	256 MB RAM 128 MB flash
Package Contents
● WAP361 Wireless-AC/N Dual Radio Wall Plate Access Point ● Ceiling and wall mounting kit ● Quick-start guide ● Ethernet network cable
Minimum Requirements
● Switch or router with PoE support, PoE injector, or AC power adapter ● Web-based configuration: Java-enabled web browser
Warranty
Access point	Limited lifetime

Documentation:

Download the Cisco WAP361 Datasheet (PDF).

הערות תמחור:

מחירי המוצרים וזמינותם כפופים לשינויים ללא הודעה מוקדמת.